Ready for GTA VI: How I Put PRO Grips on My PS5 Controller

Sten @ THREEPOINTZERO
Sten @ THREEPOINTZEROReview Writer · Grips & setup
Grand Theft Auto VI screenshot of the Vice City skyline seen across a marina full of boats on a sunny day

Vice City in Grand Theft Auto VI. Screenshot: Rockstar Games

Some of us at THREEPOINTZERO have been friends since long before there was a THREEPOINTZERO. We remember the Grand Theft Auto V release in September 2013 very clearly: the planning, the group chat that would not shut up, and the evenings that turned into nights because nobody wanted to be the first to log off. We're older now. There are jobs, families and calendars. But the GTA hype never really left us.

So yes, we are properly hyped for Grand Theft Auto VI. Rockstar has confirmed it launches on November 19, 2026 for PlayStation 5 and Xbox Series X|S. Our PS5s are ready, and so are our controllers: I've put PRO Grips on my DualSense before launch. Below is why we've waited so long for this one, and exactly how I applied the grips, so you can do the same in a few minutes.

Short answer: how I prepped my PS5 controller for GTA VI

  • What I used: PRO Grips Universal, the same pre-cut grip sheet we sell for mice.
  • Where it goes: on the contact surfaces, meaning the spots where your palms and fingers actually touch the DualSense.
  • Why: long sessions mean warm hands, and smooth plastic gets slippery. Textured grips keep the controller planted without changing how it feels in a big way.

Why we've waited so long for GTA VI

GTA V was one of those releases that became a shared memory for our group. Not because of one mission or one car, but because everyone played it at the same time and talked about it constantly. Years later, we still bring up the same moments.

That's what makes GTA VI feel bigger than "just another release" for us. It's the next chapter of a series that has followed us from our school days into adult life. Rockstar's own description sets the story in Vice City, in the state of Leonida, with Jason and Lucia as the leads. That is a setting we've been waiting to revisit for a very long time.

Grand Theft Auto VI screenshot of the Vice City skyline at night with neon-lit towers

Vice City at night. Screenshot: Rockstar Games

The anticipation is clearly not just ours, either. PlayStation has said GTA VI is the most pre-ordered game in PlayStation Store history, and Xbox says the same about the Microsoft Store. That fits with what we see among friends: everyone has a plan for launch night.

Why I put grips on my controller

We spend a lot of time talking about grip on mice. Controllers have the same problem in a different shape. The DualSense feels great out of the box, but after a couple of hours of driving, chases and missions, your hands warm up and the plastic starts to feel slick. You end up squeezing harder than you need to, and that gets tiring.

A few grip pieces in the right places fix most of that. Your hands rest on texture instead of bare plastic, so you can hold the controller more loosely and still feel in control. For a game we plan to play for months, that's a small upgrade we think is worth it.

How I applied PRO Grips Universal on my PS5 DualSense

Here's how I placed them for my grip. Your hands are different, so use it as inspiration and find your own contact points.

White PS5 DualSense controller next to a PRO Grips Universal pre-cut grips pack on a wooden table

My DualSense and the PRO Grips Universal pack, before I started. Photo: THREEPOINTZERO

There's no special template for this. The idea is simple: find where your hands touch the controller, and put grips exactly there.

  1. Clean the controller. Wipe the handles and the back of the shell so the surface is clean and dry. Grips stick best to clean plastic.
  2. Hold it the way you actually play. Not a careful "photo grip". Grab it as you would during a long session, with thumbs on the sticks and fingers on the triggers.
  3. Find your contact surfaces. Notice where your palms press on the front of the handles, where your fingers wrap around underneath, and where your thumbs rest. Those are the spots that get slippery.
  4. Pick matching pieces from the sheet. PRO Grips Universal is a pre-cut sheet with hexagons, squares, round dots, small strips and long rectangles, so choose shapes that fit each contact area instead of forcing one big piece over a curve.
  5. Test before you stick. Hold a piece in place with its backing still on and grip the controller again. If it sits where your hand naturally lands, it's in the right place.
  6. Apply and press firmly. Peel the backing, place the piece, then press it down for a few seconds, smoothing from the middle outwards.
  7. Keep moving parts and openings free. Don't cover the triggers' moving edges, the gaps around the sticks and buttons, the touchpad, the speaker or microphone holes, the light bar or the USB-C port.
PS5 DualSense controller from an angle with a long PRO Grips rectangle on the front of the left handle, hexagon grips on the D-pad and round dots on the other handle

A long rectangle on the front of the handle, hexagons on the D-pad, and round dots on the other handle. Photo: THREEPOINTZERO

On my controller, that ended up being long rectangles on the front of the handles, a mix of rectangles, a square, strips and round dots on the back where my fingers rest, and the small hexagons on top of the D-pad and face buttons, kept inside the edge of each button so nothing catches. Your layout may look different depending on hand size and how you hold it, and that's completely fine. The method is the same.

Want every piece explained? I wrote a separate guide with the full walkthrough of my setup: PS5 Controller Grips: How I Set Up PRO Grips on My DualSense.

Our setup for launch night

Our plan is simple: controllers prepped, snacks bought, and a group chat that's already too active. A couple of us will play the same evening and compare notes the next day, just like with GTA V. The difference is that now we're the ones making the gear we're using.

Grand Theft Auto VI screenshot of a car meet in Vice City with a pink muscle car under palm trees

A car meet in Vice City. Screenshot: Rockstar Games

Will grips make you better at GTA? We won't pretend that. What they do is make the controller feel the same in hour four as it did in minute one. For a game like this, that matters to us.

Grand Theft Auto VI screenshot of a large tree on a hill at sunset with the city in the distance

Sunset over Leonida. Screenshot: Rockstar Games

Same PRO Grips we use on gaming mice

If you know us from mouse gear, this is the exact same PRO Grips Universal sheet. It's made for any mouse, and as I've found with VR controllers and now the DualSense, it works just as well on other gear with smooth plastic where your hands rest.

FAQ

When does GTA VI come out?

Rockstar Games has confirmed that Grand Theft Auto VI launches on November 19, 2026 for PlayStation 5 and Xbox Series X|S.

Do PRO Grips Universal fit the PS5 DualSense controller?

Yes. There's no DualSense-specific sheet, but the Universal sheet has a mix of pre-cut shapes. Place pieces on the contact surfaces where your palms and fingers rest, and you get grip where you need it.

Where should I put grips on a PS5 controller?

Where your hands touch it: mainly the front and back of the handles. Keep the triggers' moving edges, the gaps around sticks and buttons, the touchpad, the speaker and microphone openings, the light bar and the USB-C port free.

Is your layout the right one for me?

Not necessarily. Hold your controller the way you play, find your own contact points, and test-fit each piece with the backing on before you stick it.

Can I use the same grips on my mouse?

Yes. PRO Grips Universal is the same sheet we sell for gaming mice. We also make pre-cut PRO Grips for specific mouse models.

Related guides