How to Clean a Mousepad (and Can You Wash It in the Washing Machine?)
ERA has a cloth surface and a stitched edge. Both handle a gentle hand wash well.
A dirty mousepad does not just look bad. Skin oil, sweat and dust build up in the surface and change how your mouse glides, usually making it feel slower in the spot where you aim the most. The good news is that cleaning a mousepad is easy. You just need to do it gently, because most damage comes from cleaning too hard, too hot or too fast.
This guide covers how to clean a cloth mousepad by hand, whether you can wash a mouse pad in the washing machine, how to dry it properly and how to clean hybrid and glass pads.
Quick answer
- Every week: wipe the surface with a dry or slightly damp microfiber cloth in long, straight strokes.
- Every few weeks, or after a spill: hand wash a cloth pad in lukewarm water with a drop of mild soap, using your hands or a soft cloth.
- Rinse until no soap is left, press the water out with a towel and let the pad dry completely, lying flat in the shade.
- Skip the washing machine and the dryer unless the maker of your pad says it is safe. We do not recommend machine washing ERA.
- Glass pads: wipe with a microfiber cloth and glass cleaner or isopropyl alcohol, unless the maker says otherwise.
What you need, and what to leave out
Top row: lukewarm water, mild soap, your hands or a soft cloth, a towel. Bottom row: washing machine, heat, harsh cleaners, direct sun.
- Lukewarm water. Hot water can loosen the bond between the surface and the rubber base.
- A drop of mild soap, such as hand soap or a gentle dish soap without bleach.
- Your hands, a soft microfiber cloth or a very soft brush for stubborn spots.
- A clean towel and a flat place where the pad can dry.
Leave out bleach, strong degreasers, solvents and alcohol on cloth pads. They can fade the print and damage the surface coating. Hard brushes and scouring sponges can pull up fibers and leave the surface rough.
Weekly wipe: the five-minute clean
Wipe in long, straight strokes across the whole pad, not in small circles.
Most of the time you do not need water at all. Shake or brush off crumbs, then wipe the pad with a dry or barely damp microfiber cloth in long, straight strokes. A lint roller also works well on cloth pads. This removes dust and skin oil before they work their way into the weave, and it is the best way to keep the glide consistent between deep cleans.
How to clean a cloth mousepad by hand
When the wipe no longer helps, or the pad looks darker where you aim, it is time for a proper wash. Plan it for an evening, because the pad needs time to dry.
1. Wet the pad with lukewarm water
Use a clean sink, shower or bathtub. Wet the whole pad with lukewarm water. You can submerge it briefly, but do not leave it soaking for a long time.
2. Wash gently with a drop of mild soap
Use your fingertips or a soft cloth. Let the soap do the work instead of scrubbing hard.
Add a small drop of mild soap and work it into the surface with your fingertips or a soft cloth. Focus on the darker areas where your hand and mouse rest. Do not scrub hard, and do not use a stiff brush. If a spot needs more, work on it a little longer instead of pressing harder.
3. Rinse until the water runs clear
Rinse the surface and the base with lukewarm water until there is no soap left. Leftover soap can leave the surface sticky and change the glide.
4. Press the water out with a towel
Press it flat between towels. Do not wring, twist or fold the pad.
Lay the pad on a clean towel, put another towel on top and press down with your hands. Never wring, twist or fold it. That can crease the base and separate the surface from the rubber.
5. Let it dry completely, lying flat
Flat, indoors, away from direct sun and heat.
Leave the pad lying flat in the shade, surface up, with air around it. Give it plenty of time, ideally overnight, and check that the base is dry too before you play. A damp base can slip on the desk and leave a musty smell.
Time is the only safe way to speed it up. Sun, radiators and hair dryers can warp the base and fade the print.
Can you wash a mouse pad in the washing machine?
Hand washing is the safe choice. Use a machine only if your pad maker says it is fine.
Some mousepads can go in the washing machine, but many cannot, and the care label or product page is the only place that can tell you. Machine washing bends the pad, and the spin cycle and tumble dryer are hard on the rubber base and the stitching. If your pad is not clearly listed as machine washable, wash it by hand.
If the maker does allow it, use a cold or lukewarm, gentle cycle with a little mild detergent, no fabric softener and no tumble dryer. Let it dry flat afterwards.
We do not recommend machine washing ERA. Hand washing is gentler on the stitched edge and the anti-slip rubber base.
Hybrid and coated pads
Hybrid pads have a coated or plastic-like surface. Many do not like being soaked, so start with a damp microfiber cloth and a drop of mild soap, then wipe with a clean damp cloth and dry it with a soft towel. Check the care guide from the maker before you put a coated pad under running water.
How to clean a glass mousepad
Glass pads only need a soft cloth and a little cleaner.
- Wipe off dust with a dry microfiber cloth before every session if you can. Dust and grit under the skates are the most common cause of scratches.
- For a deeper clean, spray glass cleaner or isopropyl alcohol onto the cloth, not straight onto the pad, and wipe in even strokes.
- Dry it with a second clean microfiber cloth so no streaks are left.
Some glass pads have a surface treatment, and their makers advise against alcohol. In that case use water with a drop of mild soap. Avoid ammonia, bleach, scouring pads and paper towels on any glass pad.
Clean your skates too
Turn the mouse over and wipe the skates every time you clean the pad.
A clean pad and dirty skates still feel scratchy. Wipe the skates with a dry cloth, or a little isopropyl alcohol on a cotton swab, and check them for flat edges or chips. Worn skates also wear the pad faster. On a glass pad, use dots made for glass, like Motion Skates, not glass skates or full-size PTFE.
Our mousepads
ERA has a circularly knitted polyester surface, an anti-slip SCR rubber base and stitched edges, at 500 × 450 × 4 mm. ERA #004 uses the refined ERA base with clean, unstitched edges. Both are cloth pads, and the hand wash above is the way to clean them.
Want your pad to last longer between washes? Read How Long Does a Mousepad Last? 7 Ways to Make It Last Longer.
FAQ
How often should you clean a mousepad?
Wipe it once a week. Wash a cloth pad by hand every few weeks, or straight away after a spill. If you play a lot or have sweaty hands, wash it a little more often.
Can you wash a mouse pad with dish soap?
Yes, a small drop of mild dish soap without bleach works well. Rinse it out completely so no residue is left on the surface.
Can you put a mousepad in the dryer?
No. The heat and tumbling can warp the rubber base and loosen the surface. Let it dry flat at room temperature.
How long does a mousepad take to dry?
It depends on the thickness of the pad and the air in the room. Plan for at least several hours, ideally overnight, and only use it when the base is dry too.
Why does my mousepad feel slow after washing?
Usually it is still slightly damp, or there is soap left in the surface. Let it dry longer, and rinse more thoroughly next time.
Can you use alcohol to clean a mousepad?
Not on cloth pads, because it can damage the surface and the print. On most glass pads, isopropyl alcohol is fine. Check the maker's guide if your glass pad has a coating.













